LED

The LED indicators on your Synology Router inform you in real time of its power, wired/wireless network, and USB connectivity statuses. At Control Panel > Device > LED, you can choose to use all the LEDs or only the Power LED, and schedule the LED behavior by hour and by day.

To choose an LED behavior mode:

Under the LED tab, you can customize the LED behavior for your Synology Router.

  1. Choose from the three LED behavior modes:
    • All LEDs on: All the indicators will be active.
    • Only STATUS LED on: Only the STATUS indicator will be active.
    • Customize LED schedule: Customize the LED schedule by hour and by day. Click the white or blue block first for the desired behavior, and click the target period(s) in the time table below.
  2. Click Apply to save the settings.