Knowledge Center

Stream Settings

In the Stream Settings tab, you can apply an individual stream setting to each recording type according to your needs and preference.

Recording Schedule

To apply a stream setting to a recording type:

  1. Select a stream setting respectively from Continuous, Motion Detection, Customize 1, Customize 2 drop-down menus.
  2. Click Save to apply the settings.

Note:

  • For more information on Recording Schedule, please refer to Schedule.

Advanced Continuous Recording

In this section, you can set up dynamically adjustable stream profiles for continuous recordings according to individual needs. Set a lower resolution when saving regular recordings, and for future analysis, switch to a higher resolution when a specified event occurs, allowing for more efficient use of storage while significantly saving storage costs.

To set up dynamic stream profile adjustment for the continuous recording type:

  1. Select Event Detection.
  2. Customize the conditions to switch stream profiles:
    1. Select one or more conditions from the Event Detection drop-down list.
    2. Select a stream setting from the Switch Profile drop-down list. The current stream setting will be switched to the one you specify here if any one of the selected conditions occurs.

Note:

  • If the triggering event lasts too short, it may produce fractional files.