Static Route
At Network Center > Local Network > Static Route, you can add static routes to your Synology Router's routing table. By doing so, network traffic can be transmitted via different paths according to destinations, which improves routing efficiency in your network environment.
Add a static route
- Go to Network Center > Local Network > Static Route.
- Click Create.
- Configure the following and click save the settings:
- Network destination: Enter the IP address of your destination.
- Netmask: Select a netmask of your destination.
- Gateway: Enter the IP address of the destination's default gateway.
- Interface: Select the default gateway's interface through which traffic goes to reach the destination.
View the IP routing table
- Go to Network Center > Local Network > Static Route.
- Click IP Routing Table.
- Select a network interface to view its IP routing table from the upper-left drop-down menu.