Digital output
In the Digital Output tab, you can modify camera digital output settings and test output device settings.
To set the output device normal state:
- Uncheck the Keep original camera settings box.
- Select Open Circuit or Grounded Circuit from Normal State.
To test output device settings:
- Click Start Trigger. The Current State should change each time the device is triggered. If you do not see any changes, please check your output device connection and settings.
Note：
- Checking Keep original camera settings may not immediately apply the current camera output settings. Surveillance Station routinely requests camera setting updates. The current camera output settings will be applied after the next update request.
- Some cameras do not allow the normal state to be modified. Please refer to your camera's specifications for more information.
Limitation：
- Surveillance Station is unable to get the current state for certain cameras. Current State will display "--". However, you can still trigger the digital output for these cameras by clicking Start Trigger.